Yealink SIP-T3 Administrator's Manual page 442

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Devices
Parameter features.dnd.feature_key_sync.enable
It enables or disables the DND feature synchronization.
Description
Note: It works only if "features.feature_key_sync.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled, server-based DND is enabled. Server and local phone DND are synchronized.
Default 1
Supported
All phones except CP920/CP925/CP935W
Devices
Parameter account.X.dnd.feature_key_sync.enable
It enables or disables the DND feature synchronization for account X.
Note: The value configured by this parameter takes precedence over that configured by the parameter
Description
"features.dnd.feature_key_sync.enable". It works only if "account.X.feature_key_sync.enable" is set to
1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled, server-based DND is enabled. Server and local phone DND are synchronized.
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P, T29G, CP920, CP925 and CP935W
Devices
Parameter features.dnd.feature_key_sync.local_processing.enable
It enables or disables the local DND when DND feature synchronization is enabled.
Note: It works only if "features.feature_key_sync.enable" and "features.dnd.feature_key_sync.enable"
Description
are set to 1 (Enabled). The value configured by the parameter "account.X.features.dnd.feature_key_
sync.local_processing.enable" takes precedence over that configured by this parameter.
0-Disabled, DND is performed on the server side only.
Permitted
Values
1-Enabled, DND is performed on both the server side and locally.
Default 0
Parameter account.X.features.dnd.feature_key_sync.local_processing.enable
It enables or disables the local DND when DND feature synchronization is enabled.
Description
Note: It works only if "features.feature_key_sync.enable" and "features.dnd.feature_key_sync.enable"
are set to 1 (Enabled).
0-Disabled, DND is performed on the server side only.
Permitted
Values
1-Enabled, DND is performed on both the server side and locally.
Default Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.
436
[1]
<y0000000000xx>.cfg
<MAC>.cfg
<y0000000000xx>.cfg
[1]
<MAC>.cfg