Yealink SIP-T3 Administrator's Manual page 378

Default Blank
Supported
T57W, T54W, T53C, T48U, T48S, T46U, T46S
Devices
Parameter ldap.display_extra_attr
It configures the extra attributes list of each record to be displayed on the phone.
The attribute must start with a "%" symbol. Multiple attributes are separated by spaces.
Example:
Description
ldap.display_extra_attr = %title %lang
The title and lang of the contact record are displayed on the phone screen.
Note: It works only if "ldap.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Supported
T57W, T54W, T53C, T48U, T48S, T46U, T46S
Devices
Parameter ldap.custom_extra_attr_name
It configures the custom attribute names of each record that are displayed on the phone.
The valid format is: <custom attribute name on the phone>%<attribute name on the server>. Multiple
attribute names are separated by spaces.
Example:
Description
ldap.custom_extra_attr_name = Comment%title Language%lang
The phone screen displays "Comment: title of the contact record" and "Language: lang of the contact
record".
Note: It works only if "ldap.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Supported
T57W, T54W, T53C, T48U, T48S, T46U, T46S
Devices
Parameter ldap.anonymous_bind_operation.enable
It enables or disables the phone to use anonymous identity for accessing the LDAP directory.
Description
Note: It works only if "ldap.enable" is set to 1 (Enabled).
0-Disabled
Permitted
1-Enabled, if the authentication information is not configured on the phone, the phone can use the
Values
empty one to log into the LDAP server. But if the server does not allow anonymity to log into, the
phone prompts users to enter the corresponding user name and password.
Default
1
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
ldap.user
Related
Parameters
ldap.password
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Directory
372