Central Report Collector; Central Report Collector Configuration; Ultrasonic Configuration - Yealink SIP-T3 Administrator's Manual

Hide thumbs Also See for SIP-T3:
Table of Contents

Advertisement

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones

Central Report Collector

To operate with the central report collector, the phones must be configured to forward their voice quality reports to
the specified report collector. You can specify the report collector on a per-line basis.
Topic

Central Report Collector Configuration

Central Report Collector Configuration
The following table lists the parameters you can use to configure the central report collector.
Parameter account.X.vq_rtcpxr.collector_name
It configures the hostname of the central report collector that accepts voice quality reports contained in
Description
SIP PUBLISH messages.
Permitted
String within 32 characters
Values
Default
Blank
Web UI
Account > Advanced > VQ RTCP-XR Collector Name
Parameter account.X.vq_rtcpxr.collector_server_host
It configures the IP address of the central report collector that accepts voice quality reports contained
Description
in SIP PUBLISH messages.
Permitted
IPv4 Address/FQDN
Values
Default
Blank
Web UI
Account > Advanced > VQ RTCP-XR Collector Address
Parameter account.X.vq_rtcpxr.collector_server_port
It configures the port of the central report collector that accepts voice quality reports contained in SIP
Description
PUBLISH messages.
Permitted
Integer from 0 to 65535
Values
Default
5060
Web UI
Account > Advanced > VQ RTCP-XR Collector Port
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Ultrasonic Configuration

The following table lists the parameter you can use to configure the ultrasonic.
Parameter voice.ultrasonic.enable
It enables or disables the ultrasonic.
Description
Note: When the user uses a common RJ headset to connect to the phone, the ultrasonic is auto-
matically turned off, and the ultrasonic is automatically turned on after disconnection.
0-Disabled
Permitted
Values
1-Enabled
217
[1]
<MAC>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg
<y0000000000xx>.cfg

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t2Sip-t4Sip-t5Sip-cp920

Table of Contents