Yealink SIP-T3 Administrator's Manual page 169

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default Blank
Web UI Features > Alarm > Alarm Template (Alarm Template X) > Alarm Name
Parameter alarm.X.type
Description It configures the alarm type.
0-None, do not turn on the alarm.
1-Button
Permitted
2-Man Down
Values
3-No Movement
4-Running
Default 0
Web UI
Features > Alarm > Alarm Template (Alarm Template X) > Alarm Type
Parameter alarm.X.handset_stop.enable
Description It enables or disables to terminate the alarm from the handset.
0-Disabled
Permitted
Values
1-Enabled
Default 1
Web UI
Features > Alarm > Alarm Template (Alarm Template X) > Stop Alarm From Handset
Parameter alarm.X.trigger_delay
Description It configures the delay time (in seconds) to trigger the alarm from the handset.
Permitted
Integer from 1 to 7200
Values
Default 3
Web UI
Features > Alarm > Alarm Template (Alarm Template X) > Trigger Delay
Parameter alarm.X.pre_alarm.handset_stop.enable
Description It enables or disables the handset to stop the pre-alarm (reminder before the alarm).
0-Disabled
Permitted
Values
1-Enabled
Default 1
Web UI Features > Alarm > Alarm Template (Alarm Template X) > Stop Pre-Alarm From Handset
Parameter alarm.X.pre_alarm.delay
Description It configures the pre-alarm time (in seconds) of the handset.
Permitted
Integer from 0 to 7200
Values
Default 0
Web UI Features > Alarm > Alarm Template (Alarm Template X) > Pre-Alarm Delay
163
[1]
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg