Yealink SIP-T3 Administrator's Manual page 475

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
You can configure a directed call pickup code and pick up the incoming call using the DPickup soft key.
Tip
: You can set a DSS key as a Directed Pickup key, and specify a contact you want to pick up a call from for this key. For
DSS Keys
more information, refer to
The following table lists the parameters you can use to configure directed call pickup.
Parameter features.pickup.direct_pickup_enable
It enables or disables the user to use DPickup soft key when performing the directed call pickup fea-
Description
ture.
0-Disabled
Permitted
Values
1-Enabled, the phone will display the DPickup soft key on the Dialing screen.
Default 0
Web UI Features > Pick up & Park > Directed Call Pickup
Parameter features.pickup.direct_pickup_code
It configures the directed call pickup code on a phone basis.
Description
Note: The code configured by "account.X.direct_pickup_code" takes precedence over that configured
by this parameter.
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > Pick up & Park > Directed Call Pickup Code
Parameter account.X.direct_pickup_code
It configures the directed call pickup code.
Description
Note: The code configured by this parameter takes precedence over that configured by "fea-
tures.pickup.direct_pickup_code".
Permitted
String within 32 characters
Values
Default Blank
Web UI Account > Advanced > Directed Call Pickup Code
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.
469
.
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<MAC>.cfg