Yealink SIP-T3 Administrator's Manual page 575

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Devices
Parameter bw.virtual_user.1.label
It configures the virtual account label displayed on the phone.
Description
Note: If you leave it blank, the virtual user name uses VirtualUser1 by default.
Permitted
String within 99 characters
Values
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter bw.virtual_user.1.xsi.dnd.enable
It enables or disables the user to control the DND status for the virtual account.
Description
Note: It works only if "bw.virtual_user.1.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter bw.virtual_user.1.xsi.user
It configures the user ID of virtual account for XSI access authentication.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).
Permitted
String within 99 characters
Values
Default
Blank
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter bw.virtual_user.1.xsi.password
It configures the password of virtual account for XSI access authentication.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled) and it is required only when "sip.au-
thentication_for_xsi" is set to 0 (User Login Credentials for XSI Authentication).
Permitted
String within 99 characters
Values
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter bw.virtual_user.1.xsi.host
It configures the IP address of the Xtended Services Platform server for the virtual account.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).
Permitted
IP address or domain name
Values
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
569
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg