Yealink SIP-T3 Administrator's Manual page 431

More > Features > Auto Answer > Line X > Auto Answer
Black-and-white Screen Phones:
Menu > Features > Auto Answer > Status
Parameter account.X.auto_answer_mute_enable
It enables or disables the auto answer mute feature.
Note: It works only if the values of parameters "account.X.auto_answer" and "features.allow_mute"
Description
are set to 1 (Enabled). The value configured by this parameter takes precedence over that configured
by the parameter "features.mute.autoanswer_mute.enable".
0-Disabled
Permitted
1-Enabled, the phone will mute the microphone when an incoming call is automatically answered,
Values
and then the other party cannot hear you.
Default 0
Account > Basic > Auto Answer Mute
Web UI
Note: It is only available for CP phones.
Menu > Features > Auto Answer > Account 1 > Auto Answer (On) > Auto Answer Mute
CP925/CP935W:
Phone UI
More > Features > Auto Answer > Account 1 > Auto Answer (On) > Auto Answer Mute
Note: It is only available for CP phones.
Parameter features.ip_call.auto_answer.enable
It enables or disables the auto answer feature for IP call.
Note: It works only if "features.direct_ip_call_enable" is set to 1 (Enabled). The phone cannot auto-
Description
matically answer the incoming IP call when the IP phone is in a call or dialing even if IP call auto
answer is enabled.
0-Disabled
Permitted
Values
1-Enabled, the phone can automatically answer the IP call.
Default 0
Web UI Features > General Information > IP Direct Auto Answer
Parameter features.auto_answer.first_call_only
It enables or disables the phone to only automatically answer the incoming call when the phone is
idle.
Description
Note: It works only if "account.X.auto_answer" or "features.ip_call.auto_answer.enable" is set to 1
(Enabled).
0-Disabled. If there is an incoming call arrived when the phone is in a call or dialing, the phone will
automatically answer after you end the current call or cancel the dialing.
Permitted
1-Enabled. The phone can only automatically answer the incoming call arrived when the phone is
Values
idle. If there is an incoming call arrived when the phone is in a call or dialing, you have to manually
pick up the incoming call.
Default 1
Parameter features.auto_answer_delay
It configures the delay time (in seconds) before the phone automatically answers an incoming call.
Description
Note: For the call coming from a SIP account, it works only if "account.X.auto_answer" is set to 1
(Enabled).
[1]
<MAC>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
425