Yealink SIP-T3 Administrator's Manual page 463

Default 0
Parameter features.transfer_keep_session2_after_failed.enable
It enables or disables the phone to keep the original call status after the server rejects the semi-atten-
Description
ded/attended transfer.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter transfer.blind_tran_on_hook_enable
It enables or disables the phone to complete the blind transfer through on-hook besides pressing the
Trans/Transfer soft key or TRAN/TRANSFER key.
Description
Note: Blind transfer means transferring a call directly to another party without consulting.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Features > Transfer > Blind Transfer On Hook
Parameter transfer.on_hook_trans_enable
It enables or disables the phone to complete the semi-attended/attended transfer through on-hook
besides pressing the Trans/Transfer soft key or TRAN/TRANSFER key.
Description
Note: Semi-attended transfer means transferring a call after hearing the ringback tone; Attended trans-
fer means transferring a call with prior consulting.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Features > Transfer > Attended Transfer On Hook
Parameter features.transfer_complete.prompt.enable
Description It enables or disables the phone to pop up a prompt after the transfer operation is completed.
Permitted 0-Disabled
1-Enabled
Values
Default
1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
Devices T31P, T31G, T31, T30P, T30, T27G, CP920, CP925, CP935W
Parameter features.transfer.mode
Description It configures the experience mode of the transfer.
0-Blind transfer and attended transfer are distinguished in the transfer to screen.
1-The call screen has softkeys for blind transfer and attended transfer.
2-The default transfer mode is attended transfer, users can switch to the blind transfer mode in the
Permitted
transfer to screen.
Values
3-The default transfer mode is blind transfer, users can switch to the attended transfer mode in the
transfer to screen.
4-The default transfer mode is attended transfer, users cannot switch to the blind transfer mode in the
Call Features
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
457