Broadsoft Emergency Call; Broadsoft Call Waiting Sync; Zoom Parameters; Zoom Settings - Yealink SIP-T3 Administrator's Manual

works-callpark"
Default
1
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Broadsoft Emergency Call

Parameter bw.emergency_calling.enable
Description It enables or disables the BroadWorks Emergency Calling feature.
0-Disabled
Permitted
Values
1-Enabled, the phone supports network hold and operator ring-back for emergency calls.
Default 0

BroadSoft Call Waiting Sync

Parameter call_waiting.mode
It configures the call waiting mode.
Description
Note: If it is set to 1 (XSI), it works only if "bw.xsi.enable" is set to 1 (Enabled).
0-Local
Permitted
1-XSI, the status of the call waiting feature between the IP phone and the BroadWorks server can be
Values
synchronized.
Default 0

Zoom Parameters

This section shows the parameters you can use to configure the phone with Zoom server.

Zoom Settings

Parameter zm.enable
Description It enables or disables the Zoom features.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter zm.escalate_meeting.enable
It enables or disables an active call to escalate into a meeting.
Description
Note: It works only if "zm.enable" is set to 1 (Enabled).
0-The phone does not display the Zoom softkey.
Permitted
1-Enabled, the phone displays the Zoom softkey when the call is active, you can create a conference
Values
via pressing the Zoom softkey.
Configuration Parameters
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
582