Yealink SIP-T3 Administrator's Manual page 452

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
(Phone) .
0-Off
Permitted
1-On, incoming calls are forwarded to the destination number (configured by the parameter "for-
Values
ward.always.target") immediately.
Default 0
Web UI Features > Forward&DND > Forward > Always Forward > On/Off
Menu > Features > Call Forward > Always Forward > Always Forward
Phone UI CP925/CP935W:
More > Features > Call Forward > Always Forward > Always Forward
Parameter forward.always.target
It configures the destination number of the always forward on a phone basis.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > Forward&DND > Forward > Always Forward > Target
Menu > Features > Call Forward > Always Forward > Forward to
Phone UI CP925/CP935W:
More > Features > Call Forward > Always Forward > Forward to
Parameter forward.always.on_code
It configures the always forward on code to activate the server-side always forward feature.
The phone will send the always forward on code and the pre-configured destination number (con-
figured by the parameter "forward.always.target") to the server when you activate always forward fea-
Description
ture on a phone basis.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > Forward&DND > Forward > Always Forward > On Code
Menu > Features > Call Forward > Always Forward > On Code
Phone UI CP925/CP935W:
More > Features > Call Forward > Always Forward > On Code
Parameter forward.always.off_code
It configures the always forward off code to deactivate the server-side always forward feature.
The phone will send the always forward off code to the server when you deactivate always forward
Description feature on a phone basis.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
String within 32 characters
446
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg