User Access Level Configuration - Yealink SIP-T3 Administrator's Manual

Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter static.security.custom_password_rule.X
It configures the regular expression rules for passwords.
Multiple rules can be separated by comma.
Example:
Description
static.security.custom_password_rule.1 = ^((?!(\d)\1{2}).)*$
It means the password cannot contain three consecutive numbers.
static.security.custom_password_rule.2 = ^((?!((admin)|(administrator)|(var)|(user)|(test))).)*$
It means the password cannot contain admin, administrator, var, user or test.
Permitted
regular expression
Values
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
[1]
If you change this parameter, the phone will reboot to make the change take effect.

User Access Level Configuration

For more information, refer to
The following table lists the parameters you can use to configure the user access level.
Parameter static.security.var_enable
Description It enables or disables the 3-level access permissions (admin, user, var).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter static.web_item_level.url
Description It configures the access URL of the file, which defines 3-level access permissions.
Permitted
URL within 511 characters
Values
Default
Blank
Parameter static.security.default_access_level
It configures the default access level to access the phone user interface.
Description
Note: It works only if "static.security.var_enable" is set to 1 (Enabled).
0-user
Permitted
1-var
Values
2-admin
Default
0
[2]
Yealink SIP IP Phones Configuration Guide for User Access
[1]
[1]
[1]
<y0000000000xx>.cfg
Level.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Security Features
110