Yealink SIP-T3 Administrator's Manual page 38
Hide thumbs
Also See for SIP-T3:
- Auto provisioning manual (155 pages) ,
- Administrator's manual (578 pages)
Table of Contents
Advertisement
In DHCP environment:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv6 > DHCP > Static DNS
(Enabled) > Pri.DNS
CP925:
More > Advanced (default password: admin) > Network > WAN Port > IPv6 > DHCP > Static DNS
(Enabled) > Pri.DNS
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv6 >
Static IPv6 Client > Pri.DNS
In DHCP environment:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv6 >
DHCP IPv6 Client > Static DNS(Enabled) > Pri.DNS
Parameter static.network.ipv6_secondary_dns
It configures the secondary IPv6 DNS server for the wired network.
Description
Note: It works only if "static.network.ip_address_mode" is set to 1 (IPv6) or 2 (IPv4 & IPv6). In DHCP
environment, you also need to make sure "static.network.ipv6_static_dns_enable" is set to 1 (On).
Permitted
IPv6 Address
Values
Default
Blank
T57W/T54W/T53W/T53/T53C/T48U/T46U/T43U/T42U/CP925:
Network > Basic > IPv6 Config > Static IPv6 DNS > Secondary DNS
Web UI
Other Phones:
Network > Basic > IPv6 Config > Static IP Address > Secondary DNS
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv6 > Static IP > Sec.DNS
CP925:
More > Advanced (default password: admin) > Network > WAN Port > IPv6 > Static IP > Sec.DNS
In DHCP environment:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv6 > DHCP > Static DNS
(Enabled) > Sec.DNS
CP925:
Phone UI
More > Advanced (default password: admin) > Network > WAN Port > IPv6 > DHCP > Static DNS
(Enabled) > Sec.DNS
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv6 >
Static IPv6 Client > Sec.DNS
In DHCP environment:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv6 >
DHCP IPv6 Client > Static DNS(Enabled) > Sec.DNS
Parameter static.network.ipv6_icmp_v6.enable
It enables or disables the phone to obtain IPv6 wired network settings via SLAAC (Stateless Address
Description
Autoconfiguration).
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Network Configurations
32
Advertisement
Table of Contents
Troubleshooting
