Blf Key Configuration; Blf List Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Park and retrieve calls to the monitored line
l
Initiate an outgoing intercom call to the monitored line
l
Barging In an Active Call by BLF List Key
l
Park the active call to the monitored users who are in the BLF list
l
Topics

BLF Key Configuration

BLF List Configuration

State Indicator of Remote Line
BLF/BLF List Subscription
Visual and Audio Alert for Monitor Lines
LED Mode for BLF/BLF List Key
BLF/BLF List Key LED Status and Behavior Configuration
BLF Key for Intercom Configuration
Call Information Display Configuration
BLF Key for Intercom Configuration
BLF Key Configuration
You can configure a BLF key for a specific line.
The following shows the configuration of a BLF key for Bill.
linekey.X.type=16
linekey.X.line=1
linekey.X.value=1001
linekey.X.label=Bill
Related Topic
Line Keys Configuration
BLF List Configuration
You can configure a BLF List for monitor phone. It enables the monitor phone to subscribe to a list of lines, and
receive status notifications of the monitored lines.
Note
: The IP phone subscribes to a BLF list that is set up on the server. You must access the server and set up a list of mon-
itored lines.
The following table lists the parameters you can use to configure BLF List.
Parameter account.X.blf.blf_list_uri
It configures the BLF List URI to monitor a list of users for account X.
Description Example:
account.1.blf.blf_list_uri = 4609@pbx.test.com
Permitted
SIP URI within 256 characters
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI Account > Advanced > BLF List URI
Parameter account.X.blf_list_code
481
[1]
[1]
<MAC>.cfg
<MAC>.cfg