Yealink SIP-T3 Administrator's Manual page 418

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.held.prompt_enable
It enables or disables the phone to pop up the "Set E911 location failed! Please contact your admin-
istrator." prompt when the phone failed to report location information to the server.
Description
Note: It works only if "dialplan.emergency.held.request_type" is set to YEALINKor REDSKY.
1-Enabled
Permitted
Values
0-Disabled
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.sip_header.geolocation_routing.enable
It enables or disables the phone to carry the geolocation-routing header information in the E911
INVITE message when the phone calls emergency number.
Description
Note: It works only if "dialplan.emergency.held.request_type" is set to YEALINKor REDSKY.
0-The information "Geolocation-Routing: no" exists in the E911 INVITE message, and the information
"geolocation", "Supported: geolocation" do not exist.
Permitted
Values
1-The information "Geolocation-Routing: yes" exists in the E911 INVITE message, and the information
"geolocation", "Supported: geolocation" also exist.
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter sip.emgr.header
Description It configures the content of E911 INVITE header field when the phone calls the emergency number.
priority:emergency-The E911 INVITE header field contains priority:emergency.
Permitted
Values
String-The INVITE header field can be customized.
Default priority:emergency
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.held.non_lldp.chassisid_portid_enable
Description It configures the contents of held requests when the phone cannot connect to LDAP switch.
0-The phone does not send the ChassisID and PortID fields to the server.
Permitted
1-The phone sends the ChassisID and PortID fields to the server, ChassisID field is the mac of the
Values
gateway, and PortID field is the mac of the phone.
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.held.resync_period
It configures the time interval (minutes) for the phone to send held requests regularly to the E911
Description
Location Information Server.
Permitted
0-The phone will not periodically send held requests to the server.
412
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg