Yealink SIP-T3 Administrator's Manual page 512

Hide thumbs Also See for SIP-T3:
Table of Contents

Advertisement

Default
Blank
Web UI
Account > Advanced > BLA Number
Parameter account.X.bla.notify_with_expire.enable
It enables or disables the phone to add the Expires attribute to the Subscription-State header of the
BLA NOTIFY message.
Description
Note: It works only if "account.X.shared_line" is set to 3 (Draft BLA). For teltronnic BLA, you need to set
the value of this parameter to 0 (Disabled).
0-Disabled
Permitted
Values
1-Enabled
Default
1
Supported
All phones except T30P/T30/T19(P) E2
Devices
Parameter account.X.bla.subscribe_uri_build_type
It configures the constitution of the URI for BLA subscription.
Description
Note: It works only if "account.X.shared_line" is set to 3 (Draft BLA). For teltronnic BLA, you need to set
the value of this parameter to 1 (Enabled).
0-From Contact header in the SUBSCRIBE message sent by the server
Permitted
Values
1-According to the BLA number (configured by the parameter "account.X.bla_number")
Default
0
Supported
All phones except T30P/T30/T19(P) E2
Devices
Parameter account.X.bla_subscribe_period
It configures the period (in seconds) of the BLA subscription.
Description
Note: It works only if "account.X.shared_line" is set to 3 (Draft BLA).
Permitted
Integer from 60 to 7200
Values
Default
300
Supported
All phones except T30P/T30/T19(P) E2
Devices
Web UI
Account > Advanced > BLA Subscription Period
Parameter phone_setting.call_remote_end_when_hold.busy_tone.enable
It enables or disables the phone to play a busy tone when a public hold call on the shared line is
retrieved by the remote party.
Description
Note: It works only if "features.busy_tone_delay" is not set to 0.
0-Disabled
Permitted
Values
1-Enabled
Default
1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
Devices
T31P, T31G, T31, T30P, T30, T27G, CP920, CP925, CP935W
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
[1]
[1]
[1]
Advanced Features
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<y0000000000xx>.cfg
506

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t2Sip-t4Sip-t5Sip-cp920

Table of Contents