Yealink SIP-T3 Administrator's Manual page 536

Variable Value
phonecfg=set[&configuration para-
meter=value]
phonecfg=get[&configuration parameter]
CallWaitingOn
CallWaitingOff
AlwaysFwdOn/BusyFwdOn/NoAn-
swFwdOn=xxx=n
AlwaysFwdOff/BusyFwdOff/NoAnswFwdOff
information.
The valid value of "x" is 0 or 1, 0 means you do not need to get con-
figuration information. 1 means you want to get configuration inform-
ation.
Note: The valid URI is: http(s)://<phoneIPAddress > /ser-
vlet?phonecfg=get[&accounts=x][&dnd=x][&fw=x].
Example:
http://10.3.20.10/servlet?phonecfg=get[&accounts=1][&dnd=0]
[&fw=1]
Set the valid value for the specified configuration parameter.
Note: The valid URI is: http(s)://<-
phoneIPAddress>/servlet?phonecfg=set[&configuration para-
meter=value]...[&configuration parameter=value]. It can contain up to
10 configuration parameters.
Example:
http://10.3.20.10/servlet?phone cfg=set[&account.1.enable=1][&fea-
tures.dnd.enable=1]
Get the specified configuration information.
Note: The valid URI is: http(s)://<-
phoneIPAddress>/servlet?phonecfg=get[&configuration parameter]...
[&configuration parameter]. It can contain up to 10 configuration para-
meters.
Example:
http://10.3.20.10/servlet?phonecfg= get[&account.1.enable][&fea-
tures.dnd.enable]
Activate the call waiting feature.
Deactivate the call waiting feature.
Activate an always/busy/no answer forward feature to xxx for the IP
phone ("xxx" means the destination number)
The valid value of "n" means the duration time (seconds) before for-
warding incoming calls (n is the times of 6, for example, 24). It is only
applicable to no answer forward feature.
Note: For Yealink phones, it works only if "features.fwd.allow" is set
to 1 (Enabled) and call forward mode is Phone, the always/busy/no
answer forward feature will apply to all the accounts on the phone.
Example:
http://10.10.20.10/servlet?key=NoAnswFwdOn=1001=24
Deactivate the always/busy/no answer forward feature for the IP
phone.
Note: For Yealink phones, it works only if "features.fwd.allow" is set
to 1 (Enabled) and call forward mode is Phone, the always/busy/no
answer forward feature will apply to all the accounts on the phone.
Example:
Advanced Features
Phone Action
530