Yealink SIP-T3 Administrator's Manual page 488

Description It configures the feature access code that initiates a directed call pickup for account X.
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI Account > Advanced > BLF List Pickup Code
Parameter account.X.blf_list_barge_in_code
Description It configures the feature access code of directed call pickup with barge-in for account X.
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI
Account > Advanced > BLF List Barge in Code
Parameter account.X.blf_list_call_parked_code
Description It configures the feature access code of call park for account X.
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P, T30P, T30, T29G, T19(P) E2 and CP920
Devices
Web UI Account > Advanced > BLF List Call Parked Code
Parameter account.X.blf_list_call_parked_list
It configures the serial numbers of the monitored users in the BLF list where you can park the active
call for account X.
Multiple serial numbers are separated by commas.
Example:
account.1.blf_list_call_parked_list =
When you leave it blank, you cannot park the active call to any monitored user.
Description
account.1.blf_list_call_parked_list = all
You can park the active call to any monitored user.
account.1.blf_list_call_parked_list = 1,3,4
You can park the active call to the first, third or fourth monitored user in the BLF list.
Note: This parameter has a higher priority than "transfer.dsskey_deal_type", so that when you press
the BLF list key during a call, the phone parks a call other than transferring the call. It works only if
"account.X.blf_list_call_parked_code" is configured.
Blank
Permitted
Values
all
[1]
[1]
[1]
Advanced Features
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
482