Network Reachability Detection Configuration - Yealink SIP-T3 Administrator's Manual

1. From the web user interface, click Network > Diagnostics.
2. Select Ping or Traceroute from the Command drop-down menu.
3. Enter an IP address or a URL (for example, 10.200.108.48) in the IP Address field.
4. Click Start to start a ping.
You can also diagnose network via the phone user interface at the path: Menu > Features > Diagnostics > Net-
work > Ping or Menu > Features > Diagnostics > Network > Trace Route.

Network Reachability Detection Configuration

The following table lists the parameters you can use to configure network reachability detection.
Parameter static.features.network_test.enable
Description It enables or disables the network reachability detection.
0-Disabled
Permitted
1-Enabled, if the network is unreachable, "Network unreachable" is displayed on the
Values
T42S/T42U/T41S phones, while a network unreachable icon is displayed in the status bar of other
phones.
Default 0
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter static.features.network_test.host
It configures the server address that the phone uses to detect the network reachability.
The server address can be the IP address or domain name. Multiple server addresses are separated
by semicolons.
Description
Example:
static.features.network_test.host = 192.168.1.20;192.168.1.10
Note: It works only if "static.features.network_test.enable" is set to 1 (Enabled).
Blank-The phone does not detect network reachability.
Permitted
Values
String within 1024 characters
Troubleshooting Methods
<y0000000000xx>.cfg
<y0000000000xx>.cfg
613