Syslog Logging Configuration - Yealink SIP-T3 Administrator's Manual

You can specify syslog details such as IP address or hostname, server type, facility, and the severity level of events
you want to log. You can also choose to prepend the phone's MAC address to log messages.
Topics

Syslog Logging Configuration

Viewing the Syslog Messages on Your Syslog Server
Syslog Logging Configuration
The following table lists the parameters you can use to configure syslog logging.
Parameter static.syslog.enable
Description It enables or disables the phone to upload log messages to the syslog server in real time.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Web UI Settings > Configuration > Syslog > Enable Syslog
Parameter static.syslog.server
It configures the IP address or domain name of the syslog server when exporting log to the syslog
Description
server.
Permitted
String within 99 characters
Values
Default Blank
Web UI Settings > Configuration > Syslog > Syslog Server
Parameter static.syslog.server_port
Description It configures the port of the syslog server.
Permitted
Integer from 1 to 65535
Values
Default 514
Web UI Settings > Configuration > Syslog > Syslog Server > Port
Parameter static.syslog.transport_type
It configures the transport protocol that the IP phone uses when uploading log messages to the syslog
Description
server.
0-UDP
Permitted
1-TCP
Values
2-TLS
Default 0
Web UI Settings > Configuration > Syslog > Syslog Transport Type
Parameter static.syslog.level
It configures the lowest level of syslog information that displays in the syslog.
When you choose a log level, it includes all events of an equal or higher severity level and excludes
Description
events of a lower severity level. The logging level you choose determines the lowest severity of
events to log.
Troubleshooting Methods
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
605