Alcatel-Lucent Barge In Parameters - Yealink SIP-T3 Administrator's Manual

Note: It works only if "account.X.sip_server_type" is set to 12 (Star2Star).
Permitted
String
Values
Default Blank
Parameter account.X.acd.away_url
It configures the URL the phone sends when the ACD agent changes the status to away (you press
the Away soft key on the phone).
For example :
account.1.acd.away_url= http://portal-dev.star2star.com:8181/yealink/reason_code_respon-
se?reason_code=#REASONCODE&agent_extension=ext_843 85&agent_location= starbox_628&a-
Description
gent_phone=94&customer_id=435s
#REASONCODE will be automatically replaced with the away code you entered when the URL is
sent to the server.
Note: It works only if "account.X.sip_server_type" is set to 12 (Star2Star) and "accoun-
t.X.acd.unavailable_reason_enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Parameter account.X.acd.available_url
It configures the URL the phone sends when the ACD agent changes the status to available (you
press the Avail soft key on the phone).
Description
Note: It works only if "account.X.sip_server_type" is set to 12 (Star2Star).
Permitted
String
Values
Default Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Alcatel-Lucent Barge in Parameters

If you want to use Barge In feature, you should configure a feature access code on the phone. If no feature access
code is configured, the Barge In feature is disabled.
Parameter blf.normal_barge_in_code
It configures the feature access code for normally barging in the active call of the monitored line.
If configured, you can press the Barge In soft key to barge in the call. Barge-in plays an audio alert to
Description
indicate the arrival of a new participant to the call and all call participants can interact.
Note: It applies to the Alcatel-Lucent CTS only.
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P, T30P, T30, T29G, T19(P) E2, CP920, CP925 and
Devices CP935W
[1]
[1]
Configuration Parameters
<MAC>.cfg
<MAC>.cfg
<y0000000000xx>.cfg
590