Yealink SIP-T3 Administrator's Manual page 417

It configures the password authentication when the phone sends location information to the E911
Location Information Server.
Description
Note: It works only if "dialplan.emergency.held.request_type" is set to YEALINKor REDSKY.
Permitted
String
Values
Default
Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.held.secondary.username
It configures the user name authentication when the phone sends location information to the sec-
ondary E911 Location Information Server.
Description
Note: It works only if "dialplan.emergency.held.request_type" is set to YEALINKor REDSKY.
Permitted
String
Values
Default
Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.held.secondary.password
It configures the password authentication when the phone sends location information to the sec-
ondary E911 Location Information Server.
Description
Note: It works only if "dialplan.emergency.held.request_type" is set to YEALINKor REDSKY.
Permitted
String
Values
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.held.nai.enable
It enables or disables the phone to send Network Access Identifier (nai) information to the E911 Loca-
tion Information Server.
Description
Note: It works only if "dialplan.emergency.held.request_type" is set to YEALINKor REDSKY.
0-Disabled
Permitted
Values
1-Enabled
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter dialplan.emergency.held.location_retry_timer
It configures the time interval (seconds) for the phone to report location information to the E911 Loca-
tion Information Server when the phone fails to report the location to the sever.
Description
Note: It works only if "dialplan.emergency.held.request_type" is set to YEALINKor REDSKY.
0-The phone does not report the location to the E911 Location Information Server again when failed
to report the location to the sever.
Permitted
Values
60 to 86400-The phone reports the location to the E911 Location Information Server within the spe-
cified time interval .
Call Features
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
411