Yealink SIP-T3 Administrator's Manual page 473

Web UI Directory > Multicast IP > Ignore DND
Parameter multicast.listen_address.X.volume
It configures the volume of the speaker when receiving the multicast paging calls.
If it is set to 0, the current volume of the speaker takes effect. The volume of the speaker can be adjus-
ted by pressing the Volume key in advance when the phone is during a call. You can also adjust the
Description
volume of the speaker during the paging call.
If it is set to 1 to 15, the configured volume takes effect and the current volume of the speaker will be
ignored. You are not allowed to adjust the volume of the speaker during the paging call.
Permitted
Integer from 0 to 15
Values
Default 0
Parameter multicast.receive.enhance_volume
It enables or disables the volume enhancement feature when receiving the multicast paging calls.
Note: It works only if "multicast.listen_address.X.volume" is not set to 0. If the value the parameter "mul-
Description
ticast.listen_address.X.volume" is set to 1-15 and the value of this parameter is set to 1 (Enabled), the
receiving volume will be 16-30.
0-Disabled
Permitted
Values
1-Enabled, the receiving volume will be increased by 15 level.
Default 0
Parameter multicast.receive.use_speaker
It enables or disables the phone to always use the speaker as the audio device when receiving the
Description
multicast paging calls.
Permitted 0-Disabled, the engaged audio device will be used when receiving the multicast paging calls.
1-Enabled
Values
Default
0
Parameter features.paging_auto_resume.enable
It enables or disables the phone to automatically resume the held multicast paging call after the
Description
second multicast paging call or a new call ends.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
T31P, T31G, T31, T30P, T30, T27G, CP920, CP925, CP935W
Devices
[1]
X ranges from 1 to 31.
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
467