Yealink SIP-T3 Administrator's Manual page 455

Parameter forward.no_answer.timeout
It configures ring times (N) to wait before forwarding incoming calls.
The incoming calls will be forwarded when not answered after N*M (M is configurable by "phone_set-
ting.ring_duration") seconds.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
Integer from 0 to 20 (determined by "features.forward.no_answer.show_ring_times")
Values
Default 2
Web UI Features > Forward&DND > Forward > No Answer Forward > After Ring Time (0~120s)
Menu > Features > Call Forward > No Answer Forward > After Ring Time
Phone UI CP925/CP935W:
More > Features > Call Forward > No Answer Forward > After Ring Time
Parameter features.forward.no_answer.show_ring_times
It configures the permitted values of the ring times (N) to wait before forwarding incoming calls.
Example:
Description
features.forward.no_answer.show_ring_times = 0,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
Note: It works only if "forward.no_answer.enable" or "account.X.timeout_fwd.enable" is set to 1
(Enabled).
Permitted
String within 512 characters
Values
Default 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20 (1 is not applicable to BroadSoft users)
Parameter phone_setting.ring_duration
It configures the interval (in seconds) of the ring for the no answer forward feature.
Description
Note: It works only if "forward.no_answer.enable" or "account.X.timeout_fwd.enable" is set to 1
(Enabled).
Permitted
Integer greater than or equal to 0
Values
Default 6
Parameter forward.no_answer.on_code
It configures the no answer forward on code to activate the server-side no answer forward feature.
The phone will send the no answer forward on code and the pre-configured destination number (con-
figured by the parameter "forward.no_answer.target") to the server when you activate the no answer
Description
forward feature on a phone basis.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > Forward&DND > Forward > No Answer Forward > On Code
Phone UI Menu > Features > Call Forward > No Answer Forward > On Code
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
449