Yealink SIP-T3 Administrator's Manual page 453

Values
Default
Blank
Web UI
Features > Forward&DND > Forward > Always Forward > Off Code
Menu > Features > Call Forward > Always Forward > Off Code
Phone UI CP925/CP935W:
More > Features > Call Forward > Always Forward > Off Code
Parameter forward.busy.enable
It triggers the busy forward feature to on or off on a phone basis.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
0-Off
Permitted
1-On, incoming calls are forwarded to the destination number (configured by the parameter "for-
Values
ward.busy.target") when the callee is busy.
Default 0
Web UI Features > Forward&DND > Forward > Busy Forward > On/Off
Menu > Features > Call Forward > Busy Forward > Busy Forward
Phone UI CP925/CP935W:
More > Features > Call Forward > Busy Forward > Busy Forward
Parameter forward.busy.target
It configures the destination number of the busy forward on a phone basis.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > Forward&DND > Forward > Busy Forward > Target
Menu > Features > Call Forward > Busy Forward > Forward to
Phone UI
CP925/CP935W:
More > Features > Call Forward > Busy Forward > Forward to
Parameter forward.busy.on_code
It configures the busy forward on code to activate the server-side busy forward feature.
The phone will send the busy forward on code and the pre-configured destination number (configured
by the parameter "forward.busy.target") to the server when you activate the busy forward feature on a
Description
phone basis.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
(Phone) .
Permitted
String within 32 characters
Values
Default Blank
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
447