Unify Parameters; Provisioning Parameters - Yealink SIP-T3 Administrator's Manual

2-There is no response when tapping the missed call icon.
Default
0
When you disable the phone to pop up the message if it misses a call (features.missed_call_
Case Scen-
popup.enable=0), you can also disable the phone to pop up the message when tapping the missed
ario
call icon in the status bar.
Supported
T57W, T48U, T48S
Devices

Unify Parameters

Parameter unify.enable
Description It enables or disables the Unify features.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
T31P, T31G, T31, T30P, T30, T27G, CP920, CP925, CP935W
Devices
Case Scen- Identify the Notify messages sent by the Unify server and synchronize the FWD / DND feature with
server.
ario

Provisioning Parameters

Parameter static.auto_provision.allsettings.sync.path
It configures the URL for uploading the <MAC>-all.cfg file when the phone receives a SIP NOTIFY
Description
message which contains the header "Event: put-config".
Permitted
String
Values
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter static.auto_provision.allsettings.sync
Description It enables or disables the phone to upload the <MAC>-all.cfg file to the server.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Configuration Parameters
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
598