Yealink SIP-T3 Administrator's Manual page 356

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
figured by the parameter "account.X.phone_setting.call_appearance.transfer_via_new_linekey" takes
precedence over that configured by this parameter.
Permitted
0-Disabled, the phone will transfer a call on the current line key.
1-Enabled
Values
Default 1
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter account.X.phone_setting.call_appearance.transfer_via_new_linekey
It enables or disables to distribute a transferring call to a new line key (the new line key is not seized)
for account X.
If all line keys are seized, the current line key will be used.
Description
Note: The number of the line keys is determined by "account.X.number_of_linekey". The value con-
figured by this parameter takes precedence over that configured by the parameter "phone_set-
ting.call_appearance.transfer_via_new_linekey".
Permitted
0-Disabled, the phone will transfer a call on the current line key.
1-Enabled
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter phone_setting.call_appearance.conference_via_new_linekey
It enables or disables to distribute a conference call to a new line key (the new line key is not seized).
If all line keys are seized, the current line key will be used.
Description
Note: The number of the line keys is determined by "account.X.number_of_linekey". The value con-
figured by the parameter "account.X.phone_setting.call_appearance.conference_via_new_linekey"
takes precedence over that configured by this parameter.
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
Permitted
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
Values
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.
Default 1
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter account.X.phone_setting.call_appearance.conference_via_new_linekey
It enables or disables to distribute a conference call to a new line key (the new line key is not seized)
for account X.
Description
If all line keys are seized, the current line key will be used.
350
[1]
<MAC>.cfg
<y0000000000xx>.cfg
[1]
<MAC>.cfg