Yealink SIP-T3 Administrator's Manual page 492

Description It configures the event of the BLF subscription.
0-dialog
Permitted
Values
1-presence
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter account.X.out_dialog_blf_enable
Description It enables or disables the phone to handle NOTIFY messages out of the BLF dialog.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI
Account > Advanced > Out Dialog BLF
Parameter account.X.blf.match_host.enable
Description It enables or disables host match feature for BLF/BLF list feature.
0-Disabled
Permitted
1-Enabled, the phone can only recognize the NOTIFY message whose host field is the same as the
Values
one in the SUBSCRIBE message.
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter sip.terminate_notify_sub_delay_time
It configures the interval (in seconds) for the phone to re-subscribe when it receives the NOTIFY mes-
sage with the subscription state of Terminated.
Description
If it is set to 0, the phone will re-subscribe immediately.
Permitted
Integer greater than 0
Values
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter sip.sub_refresh_random
It enables or disables the phone to use the random renewal mechanism.
Description
Note: It works only if "account.X.subscribe_expires_overlap" is set to 0 (Disabled).
0-Disabled
Permitted
1-Enabled, the phone will generate a random value. The final renewal time is equal to the original
Values
renewal time plus the random value.
Default
0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
[1]
[1]
Advanced Features
<MAC>.cfg
<MAC>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
486