Sca Configuration - Yealink SIP-T3 Administrator's Manual

You have the option to provide users the ability to do the following:
Configure a private hold soft key or Private Hold key and provide users the ability to hold a call privately.
l
Configure a call pull code, which allows users to retrieve an existing call from another shared phone that is in an
l
active or public hold status.
Topic

SCA Configuration

SCA Configuration
The following table lists the parameters you can use to configure SCA.
Parameter account.X.shared_line
Description It configures the registration line type.
0-Disabled
Permitted
Values
1-Shared Call Appearance
Default 0
Web UI Account > Advanced > Shared Line
Parameter account.X.line_seize.expires
It configures the line-seize subscription expiration time (in seconds).
Description
Note: It works only if "account.X.shared_line" is set to 1 (Shared Call Appearance).
Permitted
Integer from 0 to 65535
Values
Default 15
Parameter account.X.shared_line_callpull_code
It configures the call pull feature access code to retrieve an existing call from another shared phone
that is in an active or public hold status.
Description
Note: It works only if "account.X.shared_line" is set to 1 (Shared Call Appearance).
Permitted
String within 99 characters
Values
Default Blank
Supported
All phones except T30P/T30/T19(P) E2
Devices
Web UI Account > Advanced > Call Pull Feature Access Code
Parameter features.barge_in_via_username.enable
Description It enables or disables the phone to use the user name of the account to barge in an active call.
0-Disabled, user register name to barge in, the phone sends INVITE request with the register name
Permitted
when barging in a call
Values
1-Enabled, the phone sends INVITE request with the user name when barging in a call
Default 0
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Parameter phone_setting.call_remote_end_when_hold.busy_tone.enable <y0000000000xx>.cfg
Description It enables or disables the phone to play a busy tone when a public hold call on the shared line is
[1]
[1]
[1]
Advanced Features
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<y0000000000xx>.cfg
504