Yealink SIP-T3 Administrator's Manual page 200

g723_63-G723(63 kbps)
opus-Opus
ilbc_15_2kpbs- iLBC(15.2kbps)
ilbc_13_33kpbs-iLBC(13.33kbps)
g729ab-G729AB(G729B)
Example:
account.1.codec.g722.enable = 1
Note: The name of the audio codec in this parameter should be the correct one as listed in the above
example, otherwise the corresponding configuration will not take effect.
Permitted 0-Disabled
1-Enabled
Values
Default:
When the audio codec is G.722.1c(48kb/s), the default value is 1;
When the audio codec is G.722.1c(32kb/s), the default value is 1;
When the audio codec is G.722.1c(24kb/s), the default value is 1;
When the audio codec is G.722.1(24kb/s), the default value is 1;
When the audio codec is G722, the default value is 1;
When the audio codec is PCMU(G.711μ), the default value is 1;
When the audio codec is PCMA(G.711A), the default value is 1;
When the audio codec is G729(G729A), the default value is 1;
Default
When the audio codec is G726(16 kbps), the default value is 0;
When the audio codec is G726(24 kbps), the default value is 0;
When the audio codec is G726(32 kbps), the default value is 0;
When the audio codec is G726(40 kbps), the default value is 0;
When the audio codec is G723(53 kbps), the default value is 0;
When the audio codec is G723(63 kbps), the default value is 0;
When the audio codec is Opus, the default value is 0;
When the audio codec is iLBC(15.2kbps), the default value is 0;
When the audio codec is iLBC(13.33kbps), the default value is 0;
When the audio codec is G729AB(G729B), the default value is 0;
Web UI
Account > Codec > Audio Codec
Parameter account.X.codec.<payload_type>.priority
It configures the priority of the enabled audio codec.
The name of the audio codec:
Description
g722_1c_48kpbs-G.722.1c(48kb/s) (only for CP920/CP925/CP935W)
g722_1c_32kpbs-G.722.1c(32kb/s) (only for CP920/CP925/CP935W)
[1]
<MAC>.cfg
Audio Features
194