Exporting Headset Log; Log Files; Local Logging; Local Logging Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones

Exporting Headset Log

When the Yealink USB headset is connected to your T4XU/T5XW phone, you can export the headset log to help
analyze your problem.
Procedure
1. From the web user interface, go to Settings > Configuration.
2. Click Export in the Headset Log field to open the file download window, and then save the log file to your local
system.
A log file is successfully exported to your local system.

Log Files

You can configure your device to generate the log files locally, upload the log to the USB flash drive connected to
the phone or sent the log to a syslog server in real time, and use these log files to generate informational, analytic
and troubleshoot phones.
Topics

Local Logging

Syslog Logging
Local Logging
You can enable local logging, specify the severity level, and choose to keep the log locally, upload the log to the
USB flash drive connected to the phone or upload the local log files to the provisioning server.
Topics

Local Logging Configuration

Exporting the Log Files to a Local PC
Uploading Log to the USB Flash Drive
Viewing the Log Files
Local Logging Configuration
The following table lists the parameters you can use to configure local logging.
Parameter static.local_log.enable
It enables or disables the phone to record log locally.
Description
Note: We recommend that you do not disable this feature.
0-Disabled, the phone will stop recording log to the log files locally. The log files recorded before are
still kept on the phone.
Permitted
Values
1-Enabled, the phone will continue to record log to the log files locally. You can upload the local log
files to the provisioning server or a specific server or export them to the local system.
Default
1
Web UI Settings > Configuration > Local Log > Enable Local Log
Parameter syslog.usb.enable
It enables or disables the phone to collect log using a USB flash drive.
Description
Note: It works only if "static.local_log.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
600
<y0000000000xx>.cfg
<y0000000000xx>.cfg