Dnd In Custom Mode Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default Blank
Web UI Features > Forward&DND > DND > On Code
Menu > Features > DND > On Code
Phone UI CP925/CP935W:
More > Features > DND > On Code
Parameter features.dnd.off_code
It configures the DND off code to deactivate the server-side DND feature. The phone will send the
DND off code to the server when you deactivate the DND feature on the phone.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 0
(Phone).
Permitted
String within 32 characters
Values
Default Blank
Web UI
Features > Forward&DND > DND > Off Code
Menu > Features > DND > Off Code
Phone UI
CP925/CP935W:
More > Features > DND > Off Code

DND in Custom Mode Configuration

The following table lists the parameters you can use to configure DND in Custom mode.
Parameter account.X.dnd.enable
It triggers the DND feature to on or off.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 1
(Custom).
0-Off
Permitted
Values
1-On, the phone will reject incoming calls on account X.
Default 0
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI Features > Forward& DND > DND > AccountX > DND Status
Phone UI Menu > Features > DND > AccountX > DND Status
Parameter account.X.dnd.on_code
It configures the DND on code to activate the server-side DND feature.
The phone will send the DND on code to the server when you activate the DND feature on the phone.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 1
(Custom).
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
434
[1]
[1]
<y0000000000xx>.cfg
<MAC>.cfg
<MAC>.cfg