Start2Start Acd Parameters - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
verstat.passed.criteria=TN-VALIDATION-PASSED,TN-VALIDATION-NOT-PRESENT
The INVITE message with the"P-Asserted-Identity: "Zoom calling for Main Auto Receptionist"
<sip:16692521823@nil;verstat=TN-VALIDATION-PASSED>" and "P-Asserted-Identity: "Zoom calling
for Main Auto Receptionist" <sip:16692521823@nil;verstat=TN-VALIDATION-NOT-PRESENT>
header fields will be safe.
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter verstat.failed.criteria
It configures the value of the verstat field to identify that incoming call number is unsafe.
Description
Note: It works only if "account.X.verstat.enable" is set to 1 (Enabled). The icon displayed on the screen
is exclamation mark.
Blank-When the verstat field is blank, the incoming number is unsafe.
Permitted
String-When the configured value is the configured field, the incoming number is unsafe.
Values
Note:When the "verstat.passed.criteria" and "verstat.failed.criteria" are blank or both values are the
same, it means the number is unknown.
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Start2Start ACD Parameters

For more information on ACD, refer to Using_Star2Star_ACD_on_Yealink_IP_Phones.
Parameter account.X.acd.call_information
It configures the string the phone dials out when the ACD agent logs into/logs out of the ACD system
(you press the In/Out (LogIn/Out) soft key on the phone).
The value format: Call Center Number<time interval > User ID<time interval > Password.
Time interval ranges from 1 to 20 (in seconds).
For example :
Description
account.1.acd.call_information = 806<1 > 1005<2 > 1234
The phone will dial out the call center number 806, wait for 1s, automatically enter the user ID 1005,
wait for 2s, automatically enter the password 1234 when you press the In/Out (LogIn/Out) soft key on
the phone.
Note: It works only if "account.X.sip_server_type" is set to 12 (Star2Star).
Permitted
String
Values
Default Blank
Parameter account.X.acd.refresh_url
It configures the URL the phone sends when the ACD agent logs into/logs out of the ACD system, or
Description
refreshes the status (you press the In/Out (LogIn/Out) or Refresh soft key on the phone).
589
[1]
[1]
<y0000000000xx>.cfg
<MAC>.cfg
<MAC>.cfg