Yealink SIP-T3 Administrator's Manual page 573

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default 1
Parameter account.X.reason_code.Y
It configures the unavailable code which must match one of the codes configured on the BroadWorks
Description
platform.
Permitted
Integer from 1 to 2147483647
Values
Default Blank
Parameter account.X.reason_code_name.Y
It configures the unavailable reason which must match one of the reasons configured on the
Description
BroadWorks platform.
Permitted
String within 99 characters
Values
Default Blank
Parameter account.X.supervisor_info_code.Y
Description It configures the supervisor number.
Permitted
Integer from 1 to 2147483647
Values
Default Blank
Parameter account.X.supervisor_info_code_name.Y
Description It configures the supervisor name.
Permitted
String within 99 characters
Values
Default Blank
Parameter account.X.call_center.call_info_enable
Description It enables or disables the call center call information feature.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Parameter account.X.call_center.show_call_info_time
It configures the interval (in seconds) to specify how long the call center call information displays.
Description
Note: It works only if "account.X.call_center.call_info_enable" is set to 1 (Enabled).
Permitted
Integer from 1 to 86400
Values
Default
30
Parameter account.X.call_center.disp_code_enable
Description It enables or disables the disposition code feature.
Permitted
0-Disabled
1-Enabled
Values
Default 0
567
[1][2]
[1][2]
[1][2]
[1][2]
[1]
[1]
[1]
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg