Broadsoft Centralized Call Recording - Yealink SIP-T3 Administrator's Manual

Parameter bw.virtual_user.1.xsi.server_type
It configures the access protocol of the Xtended Services Platform server for the virtual account.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).
Permitted
HTTP or HTTPS
Values
Default Blank
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter bw.virtual_user.1.xsi.port
It configures the port of the Xtended Services Platform server for the virtual account.
Description
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).
Permitted
Integer from 1 to 65535
Values
Default 80
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter account.X.bw_disp_code.Y
Description It configures the disposition code which must match one of the codes configured on BroadWorks.
Permitted
Integer from 1 to 2147483647
Values
Default
Blank
Parameter account.X.bw_disp_code_name.Y
It configures the disposition code name which must match one of the names configured on
Description
BroadWorks.
Permitted
String within 99 characters
Values
Default Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.
[2]
Y is the code ID. Y=1-100.

Broadsoft Centralized Call Recording

Parameter account.X.call_recording.enable
Description It enables or disables the centralized call recording feature.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter bw.call_recording.mode
<MAC>.cfg
<MAC>.cfg
[1][2]
<MAC>.cfg
[1][2]
<MAC>.cfg
[1]
Configuration Parameters
<MAC>.cfg
<y0000000000xx>.cfg
570