Reboot Your Ix20 Device; Reboot Your Device Immediately - Digi IX20 User Manual

System administration
>
4. To perform an firmware update by using a local file, use the version parameter to identify the
appropriate firmware version as determined using the modem firmware check or modem
firmware list command. For example::
> modem firmware update version 24.01.5x4_ATT
Updating modem firmware ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Reboot your IX20 device

You can reboot the IX20 device immediately or schedule a reboot for a specific time every day.
Note You may want to save your configuration settings to a file before rebooting. See
configuration to a

Reboot your device immediately


Web
Log into the IX20 WebUI as a user with full Admin access rights.
1. From the main menu, click System.
2. Click Reboot.
3. Click Reboot to confirm that you want to reboot the device.

Command line
IX20 User Guide
file.
Reboot your IX20 device
Save
1015