General - Kemppi Master M 353 Operating Manual

1. GENERAL

These instructions describe the use of Kemppi's Master M welding equipment designed for light- to medium-duty pro-
fessional use in MIG/MAG welding.
Master M welding machines include both manual and automatic welding processes. Pulse welding is possible with the
Master M 355 series machines.
Master M series:
Master M product series
Master M 353
Master M 355
Master M is designed to be used together with Kemppi's Flexlite GX MIG welding guns with euro connector.
Master M can be used also for TIG * and MMA ** welding.
* TIG welding requires the use of a dedicated Flexlite TX TIG torch with euro connector.
** MMA welding requires a dedicated DIX-euro adapter.
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular atten-
tion to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the
below symbols. Read these sections carefully and follow their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in damage to the equipment or system.
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.
© Kemppi
Master M device model
Master M 353 G
Master M 353 GM
Master M 355 G
Master M 355 GM
4
Master M 353, 355
Operating manual - EN
1921960 / 2307