Installing Particle Filter (Optional) - Kemppi MasterTig 325DC Operating Manual
Hide thumbs
Also See for MasterTig 325DC:
- Operating manual (77 pages) ,
- Operating manual (82 pages) ,
- Operating manual (73 pages)
Table of Contents
Advertisement
2.4 Installing particle filter (optional)
The optional particle filter is installed together with an additional filter frame as a pack.
1.
Place the filter into the filter frame
2.
Install the filter pack in front of the air inlet on the rear of the power source.
© Kemppi
MasterTig 235ACDC, 325DC, 335ACDC, 425DC
12
Operating manual - EN
1920900 / 2215
Advertisement
Table of Contents
