Installing Cooling Unit (Optional) - Kemppi MasterTig 535ACDC Operating Manual

2.2 Installing cooling unit (optional)

For instructions on installing the equipment on cart, refer to "Installing equipment on cart (optional)" on page 12.
The cooling unit must be installed by authorized service personnel.
Do not attempt to move the power source with a hoist from its handle. The handle is meant for moving the equip-
ment when installed on cart.
Tools needed:
1. Remove the power source's rear cover.
© Kemppi
9
MasterTig 535ACDC
Operating manual - EN
1921940 / 2140