Sealing Cabinets - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)
No.
11

4.13 Sealing Cabinets

Step 1 Check that cables have been routed correctly.
Step 2 Fill in gaps between the cables and the cabinets with sealing putty.
Figure 4-73 Filling a gap with sealing putty
(1) Paper protective film
Step 3 Reinstall all protective covers.
Step 4 Install the side panel of the end enclosure frame.
Issue 03 (2023-02-08)
Check Item
Switch state
Copyright © Huawei Digital Power Technologies Co., Ltd.
Acceptance Criteria
● The states of all switches are the same as
the factory settings.
● All ACBs have been charged and are OFF.
● All feeder switches are OFF.
(2) Transparent film
4 Installation and Cable Connection
(3) Sealing putty (with the
transparent film facing
upward)
151