Sealing The Cabinet - Huawei F01T100 Quick Installation Manual

21 Sealing the Cabinet

If the cabling apertures at the bottom of the cabinet or battery compartment are the sleeves, cover the sealing
•
material (such as sealing mud) onto the cabling apertures at the bottom of the cabinet.
After the engineering installation of the cabinet is completed and before the device is powered on, to avoid the
•
condensation in the cabinet, you must remove the packaging bag from the desiccant (1 package) that is
attached to the cabinet. Place the desiccant at the bottom of the device compartment. Remove the desiccant
package only when the device is powered on next time.
After installing the cabinet on a concrete pedestal, use silicon gel to seal the cabinet bottom properly.
•
After When the cabinet is configured with the battery compartment, you must seal the apertures on the bottom
•
of the device compartment. Otherwise, hydrogen generated in the battery compartment may cause the device
compartment to explode.
You are advised to install an external padlock on the cabinet door to improve the cabinet security.
•
Check and seal the cabling apertures.
Cabinet bottom (top view)
Close the cover of the battery compartment, and then
turn the fasteners on the cover of the battery
compartment downwards.
Cabling apertures
Battery compartment bottom(top view)
Close the door and keep the key.
Support lever
Support lever
57
Cabling apertures