FusionPower6000 3.0
User Manual (Not Against a Wall)
Figure 4-76 Dust cover
(1) Dust cover
Step 7 Install the door headers and external sealing plates for the enclosure frames. Seal
the cable holes at the end of the door headers of the FusionPower6000.
Ensure that sealing plates have been installed on the sides of the enclosure frame
at the end of the FusionPower6000.
Figure 4-77 Installing door headers
Step 8 Install bottom sealing plates around the FusionPower6000.
Issue 03 (2023-02-08)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
153