Table of Contents
Advertisement
FusionPower6000 3.0
User Manual (Not Against a Wall)
Figure 4-61 Installing an ECC800-Pro
Step 5 (Connecting to the management system through a 4G network) Install an
antenna. Install a SIM card if the ECC800-Pro does not have a built-in one.
The monthly traffic quota of the SIM card is not less than the total traffic of all
networked devices. It is recommended that the monthly traffic quota of the SIM
card be greater than or equal to 100 MB. Select a standard SIM card based on the
wireless standard and frequency band.
● 4G: LTE-FDD, covering frequency bands B1, B3, B5, B7, B8, and B20; LTE-TDD,
● 3G: WCDMA, covering frequency bands B1, B5, and B8
● 2G: GSM, covering frequency bands 900 MHz/1800 MHz
1.
Issue 03 (2023-02-08)
NO TICE
covering frequency bands B38, B40, and B41
Loosen the captive screws on the panel of the main control module and
remove the module.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
137
Advertisement
Table of Contents
