Installing A Pad - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)
Figure 4-71 Installing a power module
----End

4.11 Installing a PAD

Step 1 Adjust the width of the PAD mounting support to match the PAD size.
Step 2 Remove the nut from the PAD mounting support, mount the support onto the
mounting hole in the front door of the maintenance bypass cabinet, and then
secure the support to the mounting hole using the nut.
Step 3 Route the PAD power cable through the cable hole in the PAD mounting support
and connect the cable to the PAD. Adjust the feet on the top of the PAD mounting
support.
Step 4 Clamp the PAD power cable to the support buckle, and then clamp the PAD to the
PAD mounting support.
● Ensure that the PAD is installed securely and reliably.
● To prolong the PAD battery lifespan and reduce the charge and discharge
Issue 03 (2023-02-08)
NO TICE
frequency, turn off the screen when the PAD is not in use. Do not keep it in
always-on mode.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
147