Enclosure Frame; Component Description; Pad - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)
(11) Dual-route 250 A/160 A/100 A/63 A
MCCB output module

2.4.7 Enclosure Frame

Enclosure frames are installed on the top of cabinets to secure the copper bars for
supporting bus clips and protect the copper bars on the top.
Figure 2-33 Enclosure frames
(1) Enclosure frame for the 2200 mm wide
transformer cabinet
(3) Enclosure frame for the 1200 mm wide
cable inlet and bus tie cabinet (separate or
combined)
(5) Enclosure frame for the 800 mm wide cable
inlet and bus tie cabinet (separate or
combined), maintenance bypass cabinet, and
feeder cabinet
(7) Enclosure frame for the 600 mm wide cable
inlet and bus tie cabinet (separate),
maintenance bypass cabinet, and feeder
cabinet

2.5 Component Description

2.5.1 PAD

The PAD can connect to the ECC800-Pro over WLAN and allows you to query the
FusionPower6000 status on the FusionModule app.
Issue 03 (2023-02-08)
NO TE
During the installation, you can remove an enclosure frame to increase the operation space
on the top if necessary.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Enclosure frame for the 2000 mm wide
transformer cabinet
(4) Enclosure frame for the 1000 mm wide
cable inlet and bus tie cabinet (separate or
combined)
(6) Enclosure frame for the 800 mm wide UPS
2 Product Overview
54