Ipower Intelligent Management; Powering Off The Low-Voltage System; Powering On The System - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)

5.9.6.2 iPower Intelligent Management

For details, see
Center) .
Step 1 Install and log in to the NetEco management system.
Step 2 Add devices.
Step 3 Load licenses.
Step 4 Set the iPower intelligent management features.
iPower Intelligent
Feature
AI-based predictive
maintenance of power
supply and
distribution links
Low-voltage switch
setting
----End

5.10 Powering Off the Low-Voltage System

Step 1 Check the status of the monitoring indicators and ensure that all equipment is
running properly.
Step 2 On the alarm page of the app, handle alarms based on appropriate solutions.
Step 3 Turn off all feeder switches one by one.
Step 4 Shut down and power off all UPSs. For details, see
Powering Off a UPS
Parallel
Step 5 Turn off the switch of the compensation cabinet.
Step 6 Turn off the switch of the temporary low-voltage supply power supply, remove the
cable clip, reinstall the protective cover of the enclosure frame, and close the door
panel of the enclosure frame.
----End

5.11 Powering On the System

Step 1 Turn on the transformer input switch of the medium-voltage PDU.
Step 2 Check the transformer indicators to ensure that the equipment is running properly.
Issue 03 (2023-02-08)
(For Customer) iMaster NetEco Product Documentation (Data
and
System.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
A license is required. This feature visualizes the
temperature prediction of the power supply and
distribution links and analyzes the impact on the links.
A license and an ACB Ekip COM communication
module are required. This feature allows you to browse
and configure switch setting parameters to set switches
and deliver the settings.
6.3 Shutting Down and Powering Off UPSs in a
5 Power-On Commissioning
6.2 Shutting Down and
194