Table of Contents
Advertisement
FusionPower6000 3.0
User Manual (Not Against a Wall)
2.
3.
4.
Step 6 (Connecting to the management system using a network cable) Use a straight-
through cable to connect the WAN1 port on the ECC800-Pro.
Step 7 Connect cables to the ECC800-Pro and smart ETH gateway based on the cable
labels.
Issue 03 (2023-02-08)
Figure 4-62 Removing the main control module
Install the SIM card.
Figure 4-63 Installing a SIM card
Reinstall the main control module.
Install the 4G antenna on the top of the FusionPower6000 enclosure frame,
and connect the 4G antenna cable.
Figure 4-64 Installing a 4G antenna
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
138
Advertisement
Table of Contents
