Table of Contents
Advertisement
FusionPower6000 3.0
User Manual (Not Against a Wall)
Path
System Settings
> System
Parameters >
Monitor IP > DNS
server IP
Step 4 Set the authentication password on the ECC800-Pro WebUI.
Table 5-9 Setting the authentication password
Path
System Settings
> NMS
Application >
NetEco > Set
NetEco1
Authentication
Password
Step 5 Click Submit.
----End
Issue 03 (2023-02-08)
Parameter
Primary DNS
server
Secondary DNS
server
Parameter
Authentication
password
Confirm
authentication
password
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
Default Value
192.168.8.10
192.168.8.9
Default Value
Modifyme_123
–
Setting
communication
.
NOTICE
If Cloud service
access is set to
Enable, set
Network port for
link setup to
WAN_1 or 4G
based on the
access mode.
Preferred IP
address of the
DNS server
Standby IP
address of the
DNS server
Setting
Set this parameter
based on
customer
requirements.
NOTE
Requirements for
setting passwords:
a–z, A–Z, 0–9, ~!
@#^*_={}:,./?-`
$ (8–32 characters
that include at
least three of the
following types:
digits, lowercase
letters, uppercase
letters, and special
characters)
–
193
Advertisement
Table of Contents
