Huawei FusionPower6000 3.0 User Manual page 114

FusionPower6000 3.0
User Manual (Not Against a Wall)
The vertical copper bars for the IT feeder cabinet should be secured at the front
three holes. The vertical copper bars for the utility power feeder cabinet should be
secured at the rear three holes. (Observe from the front door.)
No.
a
b
c
d
Step 2 Install the first layer of vertical copper bars for the maintenance bypass and feeder
cabinet for mechanical load.
Issue 03 (2023-02-08)
NO TICE
Combination
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
Copper Bar Screw Details
No. and
Related Part
K-1 M16x60, 3
PCS
K-2 M16x60, 3
PCS
K-3 M16x60, 3
PCS
K-4 M16x60, 3
PCS
107