Initial Startup - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)
Figure 5-8 Turning on a switch
After the UPS is powered on, initialization begins. The MDU displays the
initialization progress bar.
----End

5.4.2 Initial Startup

If the equipment is started for the first time, obtain authorization for the
equipment and set related parameters on the Settings Wizard screen. If the
equipment is not started for the first time, skip this section.
Procedure
Step 1 Obtain the startup password through the app. After the application is approved,
enter the startup password on the service authorization screen of the device to
complete device authorization.
Step 2 Set the language, time and date, network parameters, system parameters, and
battery parameters on the Settings Wizard screen.
Issue 03 (2023-02-08)
NO TE
Switches share one handle. Take out the handle when you operate different switches and
reinstall it after the operations are complete.
NO TICE
NO TE
Technical support engineers can obtain the service authorization code through the app. For
Data Center Facility Deployment Guide .
details, see the
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
163