Authenticating The Initial Startup Password - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)

5.9.2 Authenticating the Initial Startup Password

Context
●
●
●
Procedure
Step 1 Authenticate the startup password on the WebUI.
1.
2.
3.
Step 2 Hold down the SW button on the ECC800-Pro for 1s to enable the WiFi function.
Figure 5-15 Button position
Issue 03 (2023-02-08)
The initial startup password authentication is required only during initial
power-on commissioning. If the authentication has been performed
successfully, no authentication is required afterward.
The startup password needs to be authenticated again when you switch the
system type, restore the default settings, and restore the factory settings on
the WebUI or by pressing keys.
If the startup password authentication is not complete, the ECC800-Pro
WebUI and app cannot be used for commissioning.
Log in to the ECC800-Pro WebUI as an administrator.
Record the values of Barcode and Verify Code in the displayed Startup
Password dialog box.
Within 24 hours, inform the authorized service engineer of Barcode and
Verify Code or provide the QR code displayed on the screen to obtain the
password. Enter the password in the Password text box and click Submit to
complete the authentication of the startup password.
NO TICE
– The verification code is valid for 24 hours by default. After the validity
period, the verification code is automatically updated. You can also click to
update the verification code.
– Authorized service engineers can obtain the service authorization code
through the app. For details, see the
Guide .
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
Data Center Facility Deployment
177